A Comparative Study of Gamma-Ray Irradiation-Induced Oxidation: Polyethylene, Poly (Vinylidene Fluoride), and Polytetrafluoroethylene.

Radiation techniques are used to modify the physical, chemical and biological properties of polymers. This induces crosslinking and degradation reactions of polymers by utilizing radicals generated through ionizing radiation. However, oxidation products (such as carbonyl) can be formed because oxidation occurs by chain scission in the presence of oxygen. Herein, we demonstrate the gamma-ray irradiation-induced oxidation with and without fluorine using polyethylene, polyvinylidene fluoride and polytetrafluoroethylene under the same conditions. In this study, changes in element-content and chemical-bond structures were analyzed before and after gamma-ray irradiation under air atmosphere. As a result, polytetrafluo-roethylene showed less oxidation and excellent thermal properties after the absorbed dose of 500 kGy. This can be attributed to the generation of stable perfluoroalkylperoxy radicals after gamma ray irradiation in the PTFE structure containing only CF2 groups, thereby hindering the oxidation reaction.

Evaluation of Radiation Resistance of Polystyrene Using Molecular Dynamics Simulation.

The scission rates of polystyrene and fluorinated polystyrene irradiated in an irradiation facility with Co-60 γ-rays were determined using molecular dynamics simulation and gel permeation chromatography (GPC) molecular weight distributions. The prediction was based on the assumption that γ-ray energy is transferred to the initial velocity of the primary knock-on atom. We employed a molecular dynamics simulation procedure to compute the changes in bond length between the connections for selected values of the absorbed dose and compared the calculated values with measurements made on the irradiated samples. The samples were exposed to four different absorbed doses of 25, 50, 75, and 100 kGy. The scission process and scission ratio were simulated with LAMMPS with ReaxFF potential for each bond, and we compared the simulation results with the experimental data especially measuring average molecular weight to evaluate the effect of fluorination on radiation enhancement.

Preliminary Study on the Simulation of a Radiation Damage Analysis of Biodegradable Polymers.

In this study, biodegradable poly(L-lactide-co-ε-caprolactone) (PLCL) and poly(L-co-d,l lactide) (PLDLA) were evaluated using Geant4 (G4EmStandardPhysics_option4) for damage simulation, in order to predict the safety of these biodegradable polymers against gamma ray sterilization. In the PLCL damage model, both chain scission and crosslinking reactions appear to occur at a radiation dose in the range 0-200 kGy, but the chain cleavage reaction is expected to be relatively dominant at high irradiation doses above 500 kGy. On the other hand, the PLDLA damage model predicted that the chain cleavage reaction would prevail at the total irradiation dose (25-500 kGy). To verify the simulation results, the physicochemical changes in the irradiated PLCL and PLDLA films were characterized by GPC (gel permeation chromatography), ATR-FTIR (attenuated total reflection Fourier transform infrared), and DSC (difference scanning calorimetry) analyses. The Geant4 simulation curve for the radiation-induced damage to the molecular weight was consistent with the experimentally obtained results. These results imply that the pre-simulation study can be useful for predicting the optimal irradiation dose and ensuring material safety, particularly for implanted biodegradable materials in radiation processing.

Prolonged half-life of small-sized therapeutic protein using serum albumin-specific protein binder.

Many small-sized proteins and peptides, such as cytokines and hormones, are clinically used for the treatment of a variety of diseases. However, their short half-life in blood owing to fast renal clearance usually results in a low therapeutic efficacy and frequent dosing. Here we present the development of a human serum albumin (HSA)-specific protein binder with a binding affinity of 4.3nM through a phage display selection and modular evolution approach to extend the blood half-life of a small-sized therapeutic protein. As a proof-of-concept, the protein binder composed of LRR (Leucine-rich repeat) modules was genetically fused to the N-terminus of Glucagon-like Peptide-1 (GLP-1). The fused GLP-1 was shown to have a significantly improved pharmacokinetic property: The terminal half-life of the fused GLP-1 increased to approximately 10h, and the area under the curve was 5-times higher than that of the control. The utility and potential of our approach was demonstrated by the efficient control of the blood glucose level in type-2 diabetes mouse models using the HSA-specific protein binder-fused GLP-1 over a prolonged time period. The present approach can be effectively used in enhancing the efficacy of small-sized therapeutic proteins and peptides through an enhanced blood circulation time.

Continuous Flow Removal of Anionic Dyes in Water by Chitosan-Functionalized Iron Oxide Nanoparticles Incorporated in a Dextran Gel Column.

This paper describes a novel chromatographic method for efficient removal of anionic dyes from aqueous solutions. Chitosan-coated Fe3O4 nanoparticles can easily be immobilized on a dextran gel column. Single elution of Evans Blue (EB) solution to the nanoadsorbent-incorporated columns provides high removal efficiency with a maximum adsorption capacity of 243.9 mg/g. We also investigated the influence of initial concentration and solution pH on the removal efficiency of EB. The electrostatic interaction between the adsorbent surface and negatively charged sulfate groups on EB molecules promotes the efficient adsorption of dyes. The equilibrium data matched well with the Langmuir isotherm model, which indicated monolayer dye adsorption onto the adsorbent surface. To extend the application of the current method, we performed further adsorption experiments using other anionic dyes of different colors (Cy5.5, Acid Yellow 25, Acid Green 25, and Acid Red 1). All of these molecules can efficiently be captured under continuous flow conditions, with higher removal efficiency obtained with more negatively charged dyes. These findings clearly demonstrate that the present approach is a useful method for the removal of anionic dye contaminants in aqueous media by adsorption.

Efficient and stable radiolabeling of polycyclic aromatic hydrocarbon assemblies: in vivo imaging of diesel exhaust particulates in mice.

As a robust radioanalytical method for tracking carbonaceous particulates in vivo, polycyclic aromatic hydrocarbons from diesel exhaust were labeled with a radioactive-iodine-tagged pyrene analogue. Single-photon emission computed tomography and biodistribution studies showed high uptake and slow clearance of this matter in the respiratory system, which may underlie its severe toxicity.

Silver Nanomaterial-Immobilized Desalination Systems for Efficient Removal of Radioactive Iodine Species in Water.

Increasing concerns regarding the adverse effects of radioactive iodine waste have inspired the development of a highly efficient and sustainable desalination process for the treatment of radioactive iodine-contaminated water. Because of the high affinity of silver towards iodine species, silver nanoparticles immobilized on a cellulose acetate membrane (Ag-CAM) and biogenic silver nanoparticles containing the radiation-resistant bacterium Deinococcus radiodurans (Ag-DR) were developed and investigated for desalination performance in removing radioactive iodines from water. A simple filtration of radioactive iodine using Ag-CAM under continuous in-flow conditions (approximately 1.5 mL/s) provided an excellent removal efficiency (>99%) as well as iodide anion-selectivity. In the bioremediation study, the radioactive iodine was rapidly captured by Ag-DR in the presence of high concentration of competing anions in a short time. The results from both procedures can be visualized by using single-photon emission computed tomography (SPECT) scanning. This work presents a promising desalination method for the removal of radioactive iodine and a practical application model for remediating radioelement-contaminated waters.

Development of a new thiol-reactive prosthetic group for site-specific labeling of biomolecules with radioactive iodine.

In this report, we describe the radiosynthesis of a new thiol-targeting prosthetic group for efficient radioactive iodine labeling of biomolecules. Radioiodination using the precursor 3 was performed to obtain 125I-labeled tetrazole 4b with high radiochemical yield (73%) and radiochemical purity. Using the radiolabeled 4b, a single free cysteine containing peptide and human serum albumin were labeled with 125I in modest-to-good radiochemical yields (65-99%) under mildly reactive conditions. A biodistribution study of [125I]7 in normal ICR mice exhibited lower thyroid uptake values than those of 125I-labeled human serum albumin prepared via a traditional radiolabeling method. Thus, [125I]7 could be employed as an effective radiotracer for molecular imaging and biodistribution studies. The results clearly demonstrate that 4b has the potential to be effectively implemented as a prosthetic group in the preparation of radiolabeled biomolecules.

An Efficient Method for Selective Desalination of Radioactive Iodine Anions by Using Gold Nanoparticles-Embedded Membrane Filter.

Here, we demonstrate a detail protocol for the preparation of nanomaterials-embedded composite membranes and its application to the efficient and ion-selective removal of radioactive iodines. By using citrate-stabilized gold nanoparticles (mean diameter: 13 nm) and cellulose acetate membranes, gold nanoparticle-embedded cellulose acetate membranes (Au-CAM) have easily been fabricated. The nano-adsorbents on Au-CAM were highly stable in the presence of high concentration of inorganic salts and organic molecules. The iodide ions in aqueous solutions could rapidly be captured by this engineered membrane. Through a filtration process using an Au-CAM containing filter unit, excellent removal efficiency (>99%) as well as ion-selective desalination result was achieved in a short time. Moreover, Au-CAM provided good reusability without significant decrease of its performances. These results suggested that the present technology using the engineered hybrid membrane will be a promising process for the large-scale decontamination of radioactive iodine from liquid wastes.

Quantification of inhaled aerosol particles composed of toxic household disinfectant using radioanalytical method.

To assess the risk posed by a toxic chemical to human health, it is essential to quantify its uptake in a living subject. This study aims to investigate the biological distribution of inhaled polyhexamethylene guanidine (PHMG) aerosol particle, which is known to cause severe pulmonary damage. By labeling with indium-111 (111In), we quantified the uptake of PHMG for up to 7 days after inhalation exposure in rats. The data demonstrate that PHMG is only slowly cleared, with approximately 74% of inhaled particles persisting in the lungs after 168 h. Approximately 5.3% of inhaled particles were also translocated to the liver after 168 h, although the level of redistribution to other tissues, including the kidneys and spleen, was minimal. These observations suggest that large uptake and slow clearance may underlie the fatal inhalation toxicity of PHMG in humans.

Efficient bioremediation of radioactive iodine using biogenic gold nanomaterial-containing radiation-resistant bacterium, Deinococcus radiodurans R1.

We herein report a new bioremediation method using a radiation-resistant bacterium. Biogenic gold nanomaterial-containing Deinococcus radiodurans R1 showed excellent capability for the removal of radioactive iodine (>99%) in several aqueous solutions. These observations demonstrated that our remediation system would be efficiently applied to the treatment of radioactive wastes.

Gold-Nanoparticle-Immobilized Desalting Columns for Highly Efficient and Specific Removal of Radioactive Iodine in Aqueous Media.

There has been worldwide attention on the efficient removal of radioactive iodine, because it is commonly released in nuclear plant accidents. Increasing concerns on environmental problems due to the radioactive iodine are leading us to develop stable and sustainable technology for remediation of radioelement contaminants. In this work, we report a highly efficient chromatographic method for specific and rapid capture of radioactive iodine. The gold nanoparticles immobilized dextran gel columns showed excellent removal capabilities of radioactive iodine in various conditions. These results suggested that our platform technology can be a promising method for the desalination of radioactive iodines in water.

An Optimized Protocol for the Efficient Radiolabeling of Gold Nanoparticles by Using a 125I-labeled Azide Prosthetic Group.

Here, we demonstrate a detailed protocol for the radiosynthesis of a 125I-labeled azide prosthetic group and its application to the efficient radiolabeling of DBCO-group-functionalized gold nanoparticles using a copper-free click reaction. Radioiodination of the stannylated precursor (2) was carried out by using [125I]NaI and chloramine T as an oxidant at room temperature for 15 min. After HPLC purification of the crude product, the purified 125I-labeled azide (1) was obtained with high radiochemical yield (75 ± 10%, n = 8) and excellent radiochemical purity (>99%). For the synthesis of radiolabeled 13-nm-sized gold nanoparticles, the DBCO-functionalized gold nanoparticles (3) were prepared by using a thiolated polyethylene glycol polymer. A copper-free click reaction between 1 and 3 gave the 125I-labeled gold nanoparticles (4) with more than 95% of radiochemical yield as determined by radio-thin-layer chromatography (radio-TLC). These results clearly indicate that the present radiolabeling method using a strain-promoted copper-free click reaction will be useful for the efficient and convenient radiolabeling of DBCO-group-containing nanomaterials.

Highly efficient method for 125I-radiolabeling of biomolecules using inverse-electron-demand Diels-Alder reaction.

In this report, we present a rapid and highly efficient method for radioactive iodine labeling of trans-cyclooctene group conjugated biomolecules using inverse-electron-demand Diels-Alder reaction. Radioiodination reaction of the tetrazine structure was carried out using the stannylated precursor 2 to give 125I-labeled azide ([125I]1) with high radiochemical yield (65±8%) and radiochemical purity (>99%). For radiolabeling application of [125I]1, trans-cyclooctene derived cRGD peptide and human serum albumin were prepared. These substrated were reacted with [125I]1 under mild condition to provide the radiolabeled products [125I]6 and [125I]8, respectively, with excellent radiochemical yields. The biodistribution study of [125I]8 in normal ICR mice showed significantly lower thyroid uptake values than that of 125I-labeled human serum albumin prepared by a traditional radiolabeling method. Therefore [125I]8 will be a useful radiolabeled tracer in various molecular imaging and biological studies. Those results clearly demonstrate that [125I]1 will be used as a valuable prosthetic group for radiolabeling of biomolecules.

Synthesis and evaluation of an (125)I-labeled azide prosthetic group for efficient and bioorthogonal radiolabeling of cyclooctyne-group containing molecules using copper-free click reaction.

Herein we report the radiosynthesis of a pyridine derived azide prosthetic group for iodine radioisotope labeling of dibenzocyclooctyne (DBCO) conjugated molecules. The radiolabeling of the stannylated precursor 2 was conducted using [(125)I]NaI and chloramine-T to give (125)I-labeled azide ([(125)I]1) with high radiochemical yield (72±8%, n=4) and radiochemical purity (>99%). Using (125)I-labeled azide ([(125)I]1), cyclic RGD peptide and near infrared fluorescent molecule were efficiently labeled with modest to good radiochemical yields. The biodistribution study and SPECT/CT images showed that [(125)I]1 underwent rapid renal clearance. These results clearly demonstrated that [(125)I]1 could be used as an useful radiotracer for in vivo pre-targeted imaging as well as efficient in vitro radiolabeling of DBCO containing molecules.

Efficient method for iodine radioisotope labeling of cyclooctyne-containing molecules using strain-promoted copper-free click reaction.

Herein we report an efficient method for iodine radioisotope labeling of cyclooctyne-containing molecules using copper-free click reaction. For this study, radioiodination using the tin precursor 2 was carried out at room temperature to give (125)I-labeled azide ([(125)I]1) with high radiochemical yield (85%) and excellent radiochemical purity. Dibenzocyclooctyne (DBCO) containing cRGD peptide and gold nanoparticle were labeled with [(125)I]1 at 37°C for 30min to give triazoles with good radiochemical yields (67-95%). We next carried out tissue biodistribution study of [(125)I]1 in normal ICR mice to investigate the level of organ accumulation which needs to be considered for pre-targeted in vivo imaging. Large amount of [(125)I]1 distributed rapidly in liver and kidney from bloodstream and underwent rapid renal and hepatobiliary clearance. Moreover [(125)I]1 was found to be highly stable (>92%) in mouse serum for 24h. Therefore [(125)I]1 could be used as a potentially useful radiotracer for pre-targeted imaging. Those results clearly indicated that the present radiolabeling method using copper free click reaction would be quite useful for both in vitro and in vivo labeling of DBCO group containing molecules with iodine radioisotopes.